Fan blades have taken a surprising amount of material science to develop. They really are "cutting edge" stuff.
I talked a bit about Alcoa supplying the fan blades on the Pratt & Whitney geared turbofan (GTF) engine. Indeed I showed an Alcoa video of the project.
Well it turns out that these fan blades are the main reason for the GTF engine being slow to deliver.
The FT is running a story about how Pratt & Whitney are cutting engine production targets. It is not good news and they are blaming Alcoa.
Mr Hayes said front fan blades were among about five engine parts “that are causing us pain” by slowing deliveries. The company is continuing to build the engines, since fan blades go on at the end of assembly...
The fan blade, developed with Alcoa, is made of aluminium-lithium alloy and tipped with titanium on the leading edge. Efforts to speed up blade manufacturing have taken longer than expected, leaving Pratt with fewer units than it expected by now, according to people familiar with the process.
This year, we talked about delivering about 200 engines,” Mr Hayes told investors. “As I stand here today, I think that number is probably plus or minus 100 — more like 150 engines for the full year...
Nigel Coe - Morgan Stanley - Analyst
Obviously, GE is making a big play in additive manufacturing. Why couldn't you print out these fan blades -- what -- easy, right? It's simple. What is your play is additive? Is that a potential for Pratt?
Greg Hayes - United Technologies Corp. - Chairman, CEO
It's a potential for Pratt. It's probably a bigger potential maybe even with -- at the Aerospace Systems business. If you think about where additive really gives you the advantage, think about a fuel pump today, which is essentially a piece of aluminum or nickel that you hog out, you put all of these passages and cavities in, very, very difficult to machine. Where we see the opportunity there is through additive to be able to build these up 1/10,000 of a layer at a time, and build these cavities right in.
*I simplify a little here. Additive manufacturing (aka 3D printing) is of great use in making the moulds for casting. You can cheaply and easily print very complicated designs which you then use for making moulds. 3D printing has its place but nobody has yet come up with a way of actually printing the super-strong cast elements.
I don't think the statement on 3D is quite true. Direct powder sintering is sufficiently strong for many, many parts, so long as the metallurgy is right. Not all things can be made that way, but some important ones can.
I doubt blades, but I am curious about the limits and costs.
That was a really terrible pun on cutting edge, BTW. I am jealous.
People think 3-D printing can make anything...which it sort of can, if you are going to put it on a shelf to admire. Industrial use is a totally different thing. I still can image a day when you stroll into a 2,000 sq home depot, needing an obscure part..and they just print it out while you wait. It will change the manufacturing process, and more importantly the need for "inventory" It sort of reaffirms Bruce Greenwald's views the retreat of globalization....https://youtu.be/oCMB41bdTP0
Things can once again be local, but traditional concepts of labor will have to change.
While we are on 'none-to-subtle' putdowns, surely you mean 'none too subtle'.
Someone should tell them that Al Sc will work better than Al Li......
I don't know much about this but Solvay is active in this sector (via Cytec)
And expands its activities in Germany (yesterday's press release)
As I recall it, problems with the fan blades for the RB211 bankrupted RR back in the 1970s....
Tricky things, I guess
Both John and Anonymous are wrong -
it's possible to replace aerospace cast parts
including turbine blades with 3d-printed ones,
providing the 3d printing process is carefully
engineered for reliability and strength.
See for example:
"GE Aviation has said it expects to print more
than 100,000 parts for its jet engines by 2020.
The U.S. engine maker will use Arcam machines
for production of light-weight turbine blades
by 2018 at the very latest, Rene said."
That's probably why GE recently bought out Arcam and another metal 3d printing company ...
Ikedim is absolutely right. GE bought one 3D printer from Arcam a few years ago, another 10 at the beginning of this year, and the whole company 2 weeks ago. GE have either seen the future and are betting on it, or they're not sure but $700m is a good call option.
Post a Comment